
open up CMD prompt (  !IMPORTANT!  Right click and run as Administrator)

run: diskpart

then once diskpart is open run: list disk

look for the Disk # for the drive matching the sd card that containts the hidden emunand.

Write this number down and type exit to return to the CMD prompt.

================================================================

*******   FOR THIS EXAMPLE I AM USING PhysicaDrive2   *******

*******   YOUR DRIVE MAY BE A DIFFERENT NUMBER AS YOU WROTE DOWN IN THE PREVIOUS STEP    ********  

================================================================

inside your cmd window, navigate to the directory where secinspect.exe is located and run the following commands one at a time.

Once one command is finished, you may start the next one.




secinspect.exe -backup PhysicalDrive2 "boot0.bin" 2 8192

secinspect.exe -backup PhysicalDrive2 "boot1.bin" 8194 8192

secinspect.exe -backup PhysicalDrive2 "full.00.bin" 16386 8388352

secinspect.exe -backup PhysicalDrive2 "full.01.bin" 8404738 8388352

secinspect.exe -backup PhysicalDrive2 "full.02.bin" 16793090 8388352

secinspect.exe -backup PhysicalDrive2 "full.03.bin" 25181442 8388352

secinspect.exe -backup PhysicalDrive2 "full.04.bin" 33569794 8388352

secinspect.exe -backup PhysicalDrive2 "full.05.bin" 41958146 8388352

secinspect.exe -backup PhysicalDrive2 "full.06.bin" 50346498 8388352

secinspect.exe -backup PhysicalDrive2 "full.07.bin" 58734850 2352896





Once all of this is completed, you should see 10 files created in your working directory.

Copy those ten files to your sdcard:\sxos\emunand  folder.

That's it. SX OS will see your emunand as a files emunand and you can use it normally.
